![BrainExploder](/img/default-banner.jpg)
- Видео 342
- Просмотров 13 891 130
BrainExploder
США
Добавлен 16 мар 2006
A channel dedicated to airsoft and what airsofters do while on the field and off. Tinkering with guns, breaking things and inventing stuff, also Rivian videos out of left field.
Scientifically Quiet. Door Silencer Decibel Test. (-20db in 60 seconds).
Decibel test showing a traditional metal strike plate vs the Door Silencer Flexible Strike Plate. The difference will keep you up at night thinking about it but not because the door slammed 3 rooms away.
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors
Also Available on Amazon: amzn.to/3xRkDIx
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors
Also Available on Amazon: amzn.to/3xRkDIx
- Nearly Eliminates All Noise of a Closing Door
- Retains Ability to Latch and Lock Door
- Absorbs Force of Door With Flexib...
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors
Also Available on Amazon: amzn.to/3xRkDIx
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors
Also Available on Amazon: amzn.to/3xRkDIx
- Nearly Eliminates All Noise of a Closing Door
- Retains Ability to Latch and Lock Door
- Absorbs Force of Door With Flexib...
Просмотров: 488
Видео
Fanatec CSL DD Shaft Extension Install and Demo
Просмотров 8802 месяца назад
www.brainexplodermerch.com/product-page/100mm-shaft-extension-for-fanatec-csl-dd-wheel-bases 100mm Shaft Extension for Fanatec CSL DD Wheel Bases If you have the need to add more length to your Fanatec sim racing setup now you can. Maybe you want to have your monitors sit between the base and the wheel for a clear view of the dash, maybe you need to have the wheel closer to you or the base furt...
Sun Visor License Plate Mount (Universal Fit) Installation
Просмотров 2982 месяца назад
BrainExploder Merch: www.brainexplodermerch.com/product-page/sun-visor-license-plate-mount-universal-fit Amazon: amzn.to/4bjah2P A team of designers spent thousands of man hours designing the front of your car to look its best then as an afterthought a license plate is added. It never makes the car look better but it is a necessity in many states. Well now you can have a front facing plate that...
Door Silencer Strike Plate - Hear What All The Noise Is About
Просмотров 1,1 тыс.3 месяца назад
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors Also Available on Amazon: amzn.to/3xRkDIx - Nearly Eliminates All Noise of a Closing Door - Retains Ability to Latch and Lock Door - Absorbs Force of Door With Flexible and Durable Construction - Installs One to One On Existing Doors with No Modificat...
Camp Speaker Replacement Drawer For Rivian R1T/R1S
Просмотров 1,7 тыс.6 месяцев назад
Get it here: www.brainexplodermerch.com/product-page/camp-speaker-drawer-for-rivian-r1t-r1s Rivian came up with an awesome feature for the R1T and R1S, the camp speaker. It's always ready to go to the beach and pump out the jams but in reality how often do you use it. I used mine about twice in a year so I figured there is better use for the cavity. The BrainExploder Camp Speaker Drawer Replace...
Tesla CyberTruck caught in the wild on Rivian R1T Drive Cam
Просмотров 7857 месяцев назад
Rivian Accessories: www.brainexplodermerch.com/auto Out looking at Xmas lights with the family when I spotted the most unusual lights in my rear view mirror, instantly knew what it was and was excited when I realized Rivian's cams are always rolling. Had Texas plates and car was full of people it seems, green accent glow around the trim (can't see in video). #tesla #cybertruck #rivian
Tow Hook Covers for Rivian R1T and R1S
Просмотров 5837 месяцев назад
Available at these fine retailers: www.brainexplodermerch.com/product-page/tow-hook-clam-shell-cover-for-rivian-r1t-r1s amzn.to/3RZ6KiN No blackout job is complete without covering up those glossy silver tow hooks and we've made it an easy process. Our two pieces clam shell design snaps over the top and bottom of either hook and clicks together at the center seam. To make sure the cover can't b...
Rear Bumper Chrome Delete Tutorial for Rivian R1S
Просмотров 4637 месяцев назад
Get it here: www.brainexplodermerch.com/product-page/rear-bumper-silver-chrome-delete-rivian-r1t For those looking to stealthify your Rivian R1T or R1S this is a must have. With our kit and some patience you can black out or tone down the silver accents on the rear bumper. The kit is pre-cut ready to go out of the tube. All you really need is a squeegee and a heat gun or hair dryer. The kit is ...
Quad Motor Badge For Rivian R1T/R1S (Original Design)
Просмотров 5098 месяцев назад
www.brainexplodermerch.com/product-page/quad-motor-badge-for-rivian-r1t-r1s Quad Motor Badge for Rivian R1T/R1S We love our Rivians because they 'speak softly but carry a big stick' but sometimes you have to let the world know what's under the frame. Our original Quad Motor badge does just that. Inspired by other badging already found on the vehicle this one piece design is meant to look like i...
Rivian R1T/R1S Camp Speaker Replacement Concept
Просмотров 2 тыс.Год назад
Production version is available here: www.brainexplodermerch.com/product-page/camp-speaker-drawer-for-rivian-r1t-r1s
Front Bumper Chrome Delete How To on Rivian R1T or R1S
Просмотров 1,6 тыс.Год назад
Front Delete: www.brainexplodermerch.com/product-page/front-bumper-silver-chrome-delete-rivian-r1t-r1s Rear Delete: www.brainexplodermerch.com/product-page/rear-bumper-silver-chrome-delete-rivian-r1t Bumper Yellow Accents: www.brainexplodermerch.com/product-page/bumper-accent-trim-for-rivian-r1t This mod is a little more difficult than some other stuff I've created but with a little patience an...
Blacking Out Rear Bumper Chrome on Rivian R1T
Просмотров 1,2 тыс.Год назад
Straightforward tutorial on how to blackout or tone down the silver bits on the rear of the Rivian R1T, kit available on the site. Rear Bumper: www.brainexplodermerch.com/product-page/rear-bumper-silver-chrome-delete-rivian-r1t Front Bumper: www.brainexplodermerch.com/product-page/front-bumper-silver-chrome-delete-rivian-r1t-r1s #rivian #rivianr1t #chromedelete
Headlight Halos for Your Rivian
Просмотров 3,3 тыс.Год назад
Available here: www.brainexplodermerch.com/product-page/headlight-color-halos-for-rivian-r1t-r1s Have you ever taken a video of your Rivian and noticed the floating aura of the race track shaped headlight? Well that was the inspiration for this design. We thought it would be fun to add a little color to that already distinct front of the vehicle. With our headlight halos you can compliment the ...
Rivian R1T/R1S Side Marker Delete Kit Install
Просмотров 1,2 тыс.Год назад
Rivian R1T/R1S Side Marker Delete Kit Install
How to Tint Your Sidemarkers (Rivian R1T)
Просмотров 905Год назад
How to Tint Your Sidemarkers (Rivian R1T)
How to Transform Your Rivian R1T Badges and Logos
Просмотров 1,8 тыс.Год назад
How to Transform Your Rivian R1T Badges and Logos
How To Install Large Vinyl Decals/Pinstripes (Rivian R1T)
Просмотров 727Год назад
How To Install Large Vinyl Decals/Pinstripes (Rivian R1T)
Vinyl Style Shift For Rivian R1T/R1S 20" AT Wheels
Просмотров 3,9 тыс.2 года назад
Vinyl Style Shift For Rivian R1T/R1S 20" AT Wheels
Sunglass Holders for Rivian R1T/R1S | Custom Colors
Просмотров 1,2 тыс.2 года назад
Sunglass Holders for Rivian R1T/R1S | Custom Colors
Tow Hook License Plate Mount for Rivian R1T/R1S (Quick Detach)
Просмотров 4,8 тыс.2 года назад
Tow Hook License Plate Mount for Rivian R1T/R1S (Quick Detach)
Finally a Sniper Rifle You Can Field Right Out Of The Box (Silverback TAC-41)
Просмотров 35 тыс.2 года назад
Finally a Sniper Rifle You Can Field Right Out Of The Box (Silverback TAC-41)
Using the Most Awkward Airsoft Gun | CYMA PP-19 Bizon Gameplay
Просмотров 41 тыс.2 года назад
Using the Most Awkward Airsoft Gun | CYMA PP-19 Bizon Gameplay
Airsofter with night vision literally makes a grown man cry! [Watch till the end]
Просмотров 7 тыс.3 года назад
Airsofter with night vision literally makes a grown man cry! [Watch till the end]
Perfect Angle GoPro Mount (Fully Adjustable)
Просмотров 12 тыс.4 года назад
Perfect Angle GoPro Mount (Fully Adjustable)
Airsoft Cheater Tells ME To "CALL YOUR F***ING HITS"
Просмотров 25 тыс.4 года назад
Airsoft Cheater Tells ME To "CALL YOUR F ING HITS"
this to me is better than having no front plate or ppl putting those stupid tint/blur coverings on their plates. ur not trying to hide ur plates u just dont want to drill into the front bumper and block air vents...
You are speaking the facts. I once saw a plate on the front of an RX8 covering the entire tiny front grille not sure how that car was not overheating on the side of the road.
How is it possible that a gun can be stretch so easily?
fgs man stop offering the camera the parts, it can't focus quick enough, just ends up being a blurry uncool mess that adds nothing. Nice vid apart from that ;)
???
Hey mate, looking at getting this shotty, i know its been a hot minute since the vid but if you remember.. how did you manage to get consistent readings with the chrono? Ive heard its quite difficult to chrono it without it reading too hot. 😅
Where did you buy it
www.brainexplodermerch.com/product-page/100mm-shaft-extension-for-fanatec-csl-dd-wheel-bases
What about weaphones???
SELL THESE
Just get a 50-150 real red dot they are out there and that's what I did
Do you know a way to attach to the side rail? Looked it up to no avail.
Is there a link I could use?
3:10 Why use a riser? You spoilt it's looks.
I want this Airsoft guns plz
Did you notice any lose in torque? Or did it feel wobbly being that much further from the base?
None at all. It’s been super smooth and I have not changed anything to adjust to it.
I love it. First of all the video is pretty calm and relaxing. Don't know why. But second this idea is amazing! Wish this would be available for european door types.
What sort of strike plates you guys got going on there? It's tough to design for something I don't readily have access to.
@@BrainExploder true! But it is hard to describe in a comment section. Look at German Striker plates. They often have two openings by default for door and lock with openings about 65 x 12 mm and 48 x 13,5mm. But I´m not an expert as well. Also, in old buildings they are often glued and not screwed :|. But very nice product you created!
No hesiiii
I used to be an airsofter like you, until I took a BB to the knee.
The injury you can’t come back from
YES!!! MORE MICRO PLASTIC FOR THE LANDFILL!!! I LOVE MICRO PLASTIC!!! I HAVE MICRO PLASTIC IN MY PENIS AND MY BALLS AND MY BLOOD!!! WOODEN PARTS?! WHY MAKE THINGS OUT OF WOOD WHEN YOU CAN USE PLASTIC?!
Freakin epic video dude!!🤘
Thanks, love this response.
Where’s the ACOG
Hi, trying to find a supplier to the UK for the Angry Gun stock tube as shown here, anyone help?
For my normal airsoft guns, i just run replica optic, but my few high $ airsoft guns, I run real optics. Like on my CYMA M14 EBR, I just have a replica scope, but on my Umbrella Armory OCAW Banshee, I run a real red dot with real steel flashlights / lasers, etc. Just gotta do what makes sense for you and what makes you happy.
sick setup
Thanks. Made a new better dash since this.
Works also with QR2?
pls come back to this vid and tell us what the better gun that arrived is, its been 2 years
Oh snap I left you hanging. It was the ASG Steyer Scout. I shot the video but ran out of energy to make the video. It is awesome though.
@@BrainExploder thank you so much Iwas really curious
Do you sell a MG-42 optic mount
Finally, a real video meant for me. A poor person couldn't afford to buy an Airsoft and unable to participate in the game.
Bro get into it. You can start for just a couple hundred bucks.
@@BrainExploder living in third world country ain't that generous lol.
aww dang sorry to hear that dude :(
Finally one that actually fires a real round
whats the camera that he is using called?
I bought a pack of 5 on Amazon and they are plastic. The plastic one gives more resistance when I close the door without turning the handle, and it now needs a huge push and some luck to be closed. Do you still sell the felt-pad version that you show here in the video?
New ones are not plastic they are made of flexible and highly durable polymer. We don’t sell the felt variant but we just released a slightly softer option that also incudes some bump stops. It’s the Enhanced Door Silencer. amzn.to/4bfPnkn amzn.to/3VxiObB
Çok teşekkür ederim şimdi tüfeğim ve hücum yeleğim ile mahallemdeki camiye gideceğim (namaz kılmak için değil)
Almost 20 years ago 😮
Damn, almost 10 years ago, but still relevant
2+ years and still no airsoft content
Where did you get the gun rail
6:32 DAMN
This might save my sanity... Real talk tho; would getting rubber bumpers alongside these door silencers help or would it be largely redundant?
Those help if your door is out of square to the frame. If it is all lined up the built in door jamb pad should prevents the wood on wood noise but if the door is uneven a rubber bump where the door first contacts the frame could help.
I still get fog:(
You take the foam out?
@BrainExploder yes and I only put some retention on the very bottom of the essentials to keep it closer but don't cover the vent holes but after a bit it fogs
This is dope af
Thanks my dude, for when you gotta keep that front end clean.
This is gonna explode, tonight I’m sharing this everywhere. Thank me later
I’ll thank you now :). Thanks
Update : After purchasing 2 of these. They work like a charm. The doors are A LOT more quieter compared to the metal strike plate. My biggest concern was whether the part that sticks out on the front of the door would keep the deadbolt from being able to reach inside the hole or rather the door not being able to close all the way, but it worked. I would sell these myself if I could cause I don't think enough people know about this, but if they're like me. Silence is golden! They're dying to discover it. Thank you! 💯
Thanks for the update. Im happy to hear they fit your doors. Each door frame/hole is different but yours worked well and that’s awesome.
@@BrainExploder That's a fact. I have seen other types of doors. Do you plan on creating ones for different types?
Yeah we are messing around with other types but this is by far the most popular style at least in North America. But the concept is applicable to most variants.
I do this with my Nalgene bottle for work 👍
I love this invention. I just bought one today off Amazon. So, I can't wait to see if it works. I feel like this invention here is the answer to those of us who hate unnecessary noise. Door slamming all day isn't enjoyable. Hush bumps only solve part of the problem but it's the strike plate that's the remaining issue.
Thanks my guy, hope it works out for you.
r.p."G". G as in GRENADE....Not rpW 😅😅😅
Yes. “Helpful video”, in that I know it’s a whole schpiel just to get a GoPro mounted to your tactical helmet.
Back in the day it was but then I designed a mount that can do all this an more with way less work. www.brainexplodermerch.com/product-page/adjustable-nvg-mount-gopro-style
Does it lock?
No it will stay in place just fine but can be opened with a proper pull.
Will these work on the novritch goggles?
Works with most full sized goggles.
Hey, I know this was FIVE YEARS ago but did you guys discontinue your night vision recording system? Posted links don't work.
Yeah we did :(
This video is 7 years old. How is this bladder holding up? I heard that bladders in general are susceptible to bursting. Also, how does the water taste from this bladder? is it "plasticy" or normal?
Haven't used in forever but back in the day it tasted just fine, its a cheap item to replace tho and probably not a bad idea.
Its the weight of the bbs
Link to product website goes to a parked godaddy page?
All fixed now methinks.
Uhhh mate, it was supposed to be strike FACE, not strike PLATE. (neat!)
I see what you did there.